Specifi cations

Order No.	№	Number of Poles	Compatible Chucks	Weight (kg)	Drawing	Product BOX	CAD	Production	Stock Status
109151	MSC304HD70	12	MTB304HD70	9.4	View	Add	DATA	Stock Item	Stock△
109152	MSC306HD70	18	MTB306HD70	13.6	View	Add	DATA	Stock Item	Stock△
109153	MSC308HD70	24	MTB308HD70	17.8	View	Add	DATA	Stock Item	Stock△
109154	MSC310HD70	30	MTB310HD70	21.5	View	Add	DATA	Stock Item	Stock△
109155	MSC404HD70	16	MTB404HD70	12	View	Add	DATA	Stock Item	Stock△
109156	MSC406HD70	24	MTB406HD70	17.2	View	Add	DATA	Stock Item	Stock△
109157	MSC408HD70	32	MTB408HD70	22.6	View	Add	DATA	Stock Item	Stock△
109158	MSC410HD70	40	MTB410HD70	27.2	View	Add	DATA	Stock Item	Stock△
109159	MSC504HD70	20	MTB504HD70	14.3	View	Add	DATA	Stock Item	Stock△
109160	MSC506HD70	30	MTB506HD70	20.6	View	Add	DATA	Stock Item	Stock△
109161	MSC508HD70	40	MTB508HD70	27.1	View	Add	DATA	Stock Item	Stock△
109162	MSC510HD70	50	MTB510HD70	32.7	View	Add	DATA	Stock Item	Stock△
109163	MSC606HD70	36	MTB606HD70	25.5	View	Add	DATA	Stock Item	Stock△
109164	MSC608HD70	48	MTB608HD70	33.5	View	Add	DATA	Stock Item	Stock△

Other info

Strong Adsorption Forces 6150N,

… but least chips on work-surfaces（per pole of dia.70mm under Max conditions）

Cutting thrust on milling is not in the same directions, so need strong adsorption force.
Each magnetic pole contains strong neodymium magnets to generate strong force.
As Magnetism fl ows from N pole to S pole within workpiece, least chips on workpieces.

Operating Effi ciency Improvement

Manual jigs need tool operations, but magnetic chuck only push the buttons

Process integrations

No interference on cutting tools being clamped from the bottom.

Operating procedure (easy operation) Only push buttons and connectors detachable.

Custom Made, MTB Chuck

Sometimes, Standard Magnetic chucks can not be placed on machine table due to irregular table shape.
Custom made magnetic chuck can be manufactured for such kind of customers.

【e.g.】

Standard MTB506HD70

Custom Made MTB506HD70

 

Examples for custom made MTB chucks
①Change the pitch of magnetic poles.
②Change the outside dimensions.
③Delete clamping grooves on both sides.
There can be some restrictions on making custom made chucks.

Notes

Adsorption force of magnetic chuck can be changed depending on various kind of conditions.
Before using, please check and concider whether this item can be used well or not for your purpose.

①Conditions concerned adsorption force Magnetic fl ux density

Amount of magnetic flux being passed through workpiece decide the adsorption force, which means that as much as magnetic fl ux must be taken into workpiece. In case of general clamping, it is important to set properly on N and S pole to get magnetic fl ux as much as possible. (drawing 1)

 

②Conditions regarding adsorption force Contacting area

If contacting areas become double, amount of magnetic fl ux and clamping force also come to be double (drawing 2). and continuous contact surfaces become bigger, then adsorption forces beome higher. (drawing 3)

 

③Conditions regarding adsorption force Height of raising block

Higher raising block means less amount of magnetic flux through workpiece. Need to check attenuation rate (drawing 4)

 

④Conditions regarding adsorption force Material of workpieces

Materials of workpiece, and jig plates must be checked on its attenuation rate (drawing 5)

 

⑤Conditions regarding adsorption force Surface condtions of workpieces

Adsorption force per unit area can be changed depend on surface conditions of workpiece, and jig plate, which must be checked beofore using. (drawing 6)

 

⑥Conditions regarding the adsorption force Recommended workpiece sizes

Magnetic fl ux in workpiece fl ows from the center of one pole to other one with. drawing semicircle shape. In case that thickness of  workpiece is less than semicircle, magnetic flux flows out of workpiece , which will be led to less adsorption force. Workpiece must have more than minimum dimensions. and be put on 4 poles at least.(drawing 7) Recommended size of workpiece. No. Length × Width × Thickness MTB-HD70 166×166×19 or over

 

⑦Conditions regarding the adsorption force Calculation of clamping force

 【Calculation of adsorption forces】 （Workpiece size: 320 x320 x 35 Casting(FC250)）

  

⑧Conditions regarding machining Directions of cutting thrust

In case that directions of cutting thrust is horizontal to adsorption face, Adsorption force against cutting thrust need approx.. 3-10 times.(coefficient frictions is 0.1-0.3). If not enough holding force, need to set stopper to that directions of cutting thrust(drawing 8)

 

⑨Conditions regarding remained magnetism Use of demagnetizer

Workpieces after heat treatment can keep remained magnetism Not so easy to release it. Need to remove magnetism by demagnetizer.