PLA CLAMPING KITS

E-9472

Feature: ■World's first engineering plastic (PBT resin) clamping set.
■The material used offers excellent strength and rigidity, and has the highest level elasticity among engineering plastics.
■Lightweight at 1/1 of steel. Easy to carry and able to reduce set-up time.
■Does not rust, making it ideal for clamping in locations and for workpieces where rust is a problem, and allowing it to be used while constantly clean.
■Capable of soft clamping without scratching the workpiece. Useful for clamping of soft materials and finished products.
■Ideal for clamping the item to be measured such as with a coordinate measuring machine and will not damage tables or workpieces or cause injuries if dropped.
■Can also be used as a clamp for electrical discharge machines. Can be used with both synthetic and mineral machining liquids.
■Can also be used as a clamp for light work such as engraving.
■Employs aluminum (A556) stud bolts for increased strength and rigidity. Rust resistant with alumite treatment.
■Innovative design that gives full consideration to functionality.

Specifications

Order No.	No.	Matching Screw Diameter (Coarse Thread)	Weight(kg)	Drawing	Product BOX	Production	Stock Status	CAD
935723	PCS0006	M 6－M8	1.7	View	Add	Stock Item	Stock〇
929997	PCS0008	M 8－M8	1.7	View	Add	Stock Item	Stock〇	DATA
936630	PCS0010	M10－M8	1.7	View	Add	Stock Item	Stock〇
936631	PCS0012	M12－M8	1.8	View	Add	Stock Item	Stock〇

Step Blocks 28.8H, 45.3H, 94.8H 4 pieces of each (Engineering plastic)		Stud Bolts M8 × 100, 125, 150, 175, 200 4 pieces of each (Aluminum A5056 with alumite surface treatment)
Step Clamps 63.5L, 101.6L, 152.4L 2 pieces of each (Engineering plastic)		Double Flanged Nuts 10 pieces of M8 (Engineering plastic)
Plain clamp 63.5L, 101.6L, 152.4L 2 pieces of each (Engineering plastic)	1993 Designated as Ministry of International Trade and Industry Good Design Product

Property	Specific Gravity	Water Absorption Ratio	Heat Distortion Temperature	Thermal Conductivity	Linear Expansion Coefficient	Fire Resistance
Units	-	%	℃	cal/(cm･s･℃)	1℃	UL 94 standard
Conditions	23℃	20°C for 30 days	18.6kg/cm	-	-30℃～+30℃	1.6mmBar
Data	1.41	0.35	208	4.0x10-4	3～8x10-5	HB

Property	Tensile Strength Yield Point	Tensile Rupture Point	Bending Strength	Bending Elasticity	Izod Impact Strength	Insulation Breakdown Strength	Arc Resistance
Units	N/mm2	%	N/mm2	N/mm2	kJ/m2	kv/m	sec
Conditions	23℃	23℃	23℃	23℃	1/8″ × 1/2″ 23°C bar with notch	D149	D495
Data	97	4～6	170	5200	650	Short time method 20 Step method 15	125

Is there information you required?

Thank you.