LOCK-TIGHT MC PRECISION MACHINE VISES

E-9275M

Feature: ■Parallel accuracy of matched specification products is within .1.
■Can also be used facing horizontally.
【Accessories】
Standard guide block (2 pieces per set) compatible groove width 18 mm ... 1 set
Handle ... 1 piece

Specifications

Type	Order No.	No.	Jaw Width	Jaw Depth	Jaw Opening	Standard Guide Block	Clamping Force kN	Weight (kg)	Drawing	Product BOX	CAD	Production	Stock Status
MC	932186	LT100MC	101	32	102	18	30	11	View	Add	DATA	Stock Item	Stock〇
MC	932187	LT150MC	151	44	143	18	40	32	View	Add	DATA	Stock Item	Contact
MCG(Matched Specification)	932451	LT100MCG	101	32	102	18	30	11	View	Add	DATA	Stock Item	Stock〇
MCG(Matched Specification)	932452	LT150MCG	151	44	143	18	40	32	View	Add	DATA	Stock Item	Contact

Usage

Ordering Parallel Products

(A and B can be aligned within 0.01 no matter how many pieces)

If the suffix of the manufacture no. (attached to the outer box and main body) is the same letter, then the product are parallel no matter how many pieces. There is no charge for parallel products.

◆When purchasing for the first time
Order matched specification products (suffix G)
When ordering, specify the groove width of the machine you are using.

◆For additional orders
Contact us with the suffix letter of the manufacture no. (stamped
on the name plate) and the guide block width of a vise that you
have.

Increasing the Jaw Opening

A large jaw opening can be obtained by changing the jaw plate positions.

◆Jaw opening depending on the jaw plate attachment position


LT100MC	0 - 102	48 - 150	115 - 217	163 - 265
LT150MC	0 - 143	63 - 206	160 - 303	223 - 366

◆How to move the jaw plates

Accuracy Standards (Static Accuracy)

No.	Inspection Points (per 100 mm)	Former JIS Standard (O Grade)	Nabeya SPEC
1	Parallelism between bottom surface of main body and sliding surface	0.015	0.010
2	Perpendicularity between jaw plate and sliding surface (smaller than right angle)	0.030	0.015
3	Perpendicularity between T-slot and jaw plate surface of stationary jaw side.	0.015	0.010
4	Parallelism between T-slot and jaw plate surface of stationary jaw side.	0.015	0.010
5	Perpendicularity between side face of main body and sliding surface	-	0.030
6	Perpendicularity between side face of main body and sliding surface	-	0.030
7	Perpendicularity between side face of main body and jaw plate surface of stationary jaw side	-	0.050
8	Perpendicularity between side face of main body and jaw plate surface of stationary jaw side	-	0.050
(Clamping Accuracy)
9	Parallelism between top surface of clamped test block and bottom surface of main body	0.020	0.015
10	Lift-up of top surface of test block when clamped	0.030	0.015

Contribute the improving of production efficieny by offering our standardized items.