VIBRATION ISOLATION FOOT JACK (Light Weight Type)

E-9943

Material
Bolt：45C Resin part: Polyamide
Resin part：Polyamide
Surface treatment
Trivalent chromate plating
Feature
■Foot-shaped mount that uses polyurethane foam for high vibration isolation effect.
■Able to remove low frequency vibrations
Uses polyurethane foam with better properties than rubber based vibration isolation materials enabling removal of lower vibration frequencies.
■Does not discolor the installation surface
The installation floor surface is not discolored by the vibration removal material.
■The foot size is uniform across all types
Can choose from 5 types to suit the load (6.8 N to 180 N) with the same foot size.
■Includes a resin cover
Fitted with a nicely designed resin cover.

[Application]
■Remove vibrations from the outside
■Reduce vibrations transmitted to the outside

※1 The resonant frequency is the calculated value when the maximum allowable load is applied.
※2 Applicable vibration frequency is vibration frequency which can be isolated. The estimated frequency is calculated such that the vibration in vertical direction can be decreased to 1/2 when maximum loading is applied.
※3 The vibration isolation material deformation is the calculated value when the maximum allowable load is applied.

Spec/Price
Usage
How to use Product BOX

Specifi cations

Order
No.		 № ViBration
isolation
material
color		 Screw
diameter
(coarse
thread)		 Load
tolerance
N		 Natural
frequency
Hz		 Applicable
vibration
frequencies
Hz		 Vibration
material
defl ection
mm		 Weight
(g)		 Drawing Product
BOX		 Production Stock
Status
109447 BFL20D007 Pink M5X0.8 6.8 to 16 14 ≥ 28 2 12 View Add Stock Item Contact
109448 BFL20D013 Yellow M5X0.8 13.0 to 31 14 ≥ 29 2 12 View Add Stock Item Stock〇
109449 BFL20D030 Green M5X0.8 31.0 to 70 14 ≥ 27 2 13 View Add Stock Item Stock〇
109450 BFL20D060 Blue M5X0.8 61.0 to 130 14 ≥ 28 2 14 View Add Stock Item Stock〇
109451 BFL20M097 Purple M5X0.8 83.0 to 180 13 ≥ 26 3 14 View Add Stock Item Stock△

Usage

Selection Guide

From the table on the right, read the natural frequency for the mounted load and select the mount with the frequency of1/2 (0.5 times) or lower than the vibration frequency you want to isolate or remove.
(Refer also to the selection examples in the built-in vibration isolation mount page)

Characteristic data

Precautions for Use

・ If the natural frequency of the mount is 1/√2 (0.7 times) or more vibration frequency you want to remove, the vibration removal eff ect cannot be obtained and the vibrations will be amplifi ed.
・ In particular, when installed on equipment where the vibration frequency (rotation speed) changes such as motors and compressors, be careful because the mounted object may sway heavily if the vibration frequency becomes close to the natural frequency of the mount.

Browsing history
Is there information you required?

Back to the top of this page