BUILT-IN VIBRATION ISOLATION MOUNT (Compact Type)

E-9942

Material
Fittings：Stainless steel
Attenuation material：Ether-based polyurethane foam
Feature
■Uses polyurethane foam material that can reduce vibrations even low frequency vibrations.
■Uses ether-based polyurethane that is resistant to water and ultraviolet light, and exhibits virtually none of the degradation that occurs with rubber.
■Stainless steel fi ttings are used.

[Application]
Isolating vibrations caused by vibrating equipment such as compressors, blowers, coolers, and electric motors.Removing vibrations transmitted to equipment that is sensitive to vibrations such as measurement instruments and microscopes.

Spec/Price
Usage
How to use Product BOX

Specifi cations

Order No. № ViBration
isolation
material Color		 Load tolerance Natural
frequency
Hz		 Weight
(g)		 Drawing Product
BOX		 Production Stock
Status
N kgf
131029 BBC12D007 Pink 4 to 6 0.4 to 0.6 ≥ 19 13 View Add Stock Item Stock〇
131030 BBC16D007 Pink 6 to 11 0.6 to 1.1 ≥ 16 16 View Add Stock Item Stock〇

Usage


Small Compressor Vibration Isolation

Precautions for Use

・If the vibration frequency is √2times the natural frequency of the mount or less, the vibrations will be amplifi ed.
・ Use the mounts inside the load tolerance range. Furthermore, install such that the load is in the vertical (compressive) direction.
・ Mounts cannot be used under conditions of tensile or shear load (refer to the above examples). Furthermore, ensure that no tensile or shear load is applied during transportation and storage.Application of tensile or shear load may damage the mount.

Browsing history
Is there information you required?

Back to the top of this page