Application (Locating Elements)
- Checking by Product Category
-
- Checking by workpiece material
-
List of application (Locating Elements)
-
Clamping / Locating Elements
Reduction of jig fixture cost by using standard set (Measuring)
Reduction of jig fixture cost by using standard set (Measuring) (Product) Measuring Jig System MJIGS-8E and Aluminum Sub-Table ALSB2525 (Trou...
-
Clamping / Locating Elements
Reduction of setup time by ont-touch clamping and external setup
Reduction of setup time by one-touch clamping and external setup (VMC) (Product) Multi-auto clamps MT121A Q-Lock Elements QLT19A (Problem) 20 ...
-
Clamping / Locating Elements
Clamping method with toggle clamp (Measuring)
Clamping method with toggle clamp (Measuring) 【Product】 Toggle Down Clamps 6803-2 【Trouble】 It took a lot of time to ...
Reduction of jig fixture cost by using standard set (Measuring)
(Product)
Measuring Jig System MJIGS-8E and Aluminum Sub-Table ALSB2525
(Trouble)
Special jig fixtures has been manufactured for each workpiece in house production. Therefore, there were a lot of parts. It was difficult to keep them.
(Solution)
The number of jis fixture part was reduced by using versatille jig system.
And, keeping parts became easier.
Reduction of setup time by one-touch clamping and external setup (VMC)
(Product)
Multi-auto clamps MT121A Q-Lock Elements QLT19A
(Problem)
20 pcs of workpiece have been mounted on the jig fixture plate. But, it took a lot of time to clamp all workpieces with conventional jig parts.
(Solution)
External setup became possible with Q-Lock Elements. As result, setup time was dramatically reduced. And, all workpieces can be clamped at the same time with multi -auto clamps.
Clamping method with toggle clamp (Measuring)
【Product】
Toggle Down Clamps 6803-2
【Trouble】
It took a lot of time to set-up workpiece due to the irregular shape.
【Solution】
Reduction of setup time became possible with toggle clame and Vee block.
And, workpiece could be clamped firmly.
- Browsing history
-
- Is there information you required?
-
- Thank you.