Q-LOCK ELEMENTS PINS(Pneumatic Type, Double Action)

E-9659C

Material: Main body : Stainless steel(SUS440C)

Heat treatment: Main body : Hardened(HRC55)

Feature: ■Double action (clamping by air)
■Air blowing, checking seating
■Suitable for light cutting on vertical machining centers.
■Both clamp, and un-clamp are by pneumatic power.
■By switching of electronic valve, automatic exchanges of jigs can be arranged.
■System construction is easy by taking use of air piping in factory.

SPECIFICATIONS

Type	Order No.	№	OUTER DIAMETER	Overall diameter	PIN DIAMETER	クランプ力 kN ※0.5MPa時	Weight (Kg)	Drawing	Product BOX	CAD	Production	Stock Status
Locating pin	125739	QLA19DRP	54	42.5	19	1	0.23	View	Add	DATA	Stock Item	Stock〇
Locating pin	125748	QLA26DRP	60	53	26	1.5	0.3	View	Add	DATA	Stock Item	Stock〇
Locating pin	125757	QLA32DRP	72	65.5	32	2.4	0.63	View	Add	DATA	Stock Item	Stock〇
Locating pin	162964	QLAH19DRP	72	44	19	5	0.55	View	Add	DATA	Stock Item	Stock〇
Locating pin	162967	QLAH26DRP	79	53	26	7	0.71	View	Add	DATA	Stock Item	Stock〇
Locating pin	162970	QLAH32DRP	92	59	32	10	1.07	View	Add	DATA	Stock Item	Stock〇
Dia. Pin	125740	QLA19DDP	54	42.5	19	1	0.23	View	Add	DATA	Stock Item	Stock〇
Dia. Pin	125749	QLA26DDP	60	53	26	1.5	0.3	View	Add	DATA	Stock Item	Stock〇
Dia. Pin	125758	QLA32DDP	72	65.5	32	2.4	0.63	View	Add	DATA	Stock Item	Stock〇
Dia. Pin	162965	QLAH19DDP	72	44	19	5	0.55	View	Add	DATA	Stock Item	Stock〇
Dia. Pin	162968	QLAH26DDP	79	53	26	7	0.71	View	Add	DATA	Stock Item	Stock〇
Dia. Pin	162971	QLAH32DDP	92	59	32	10	1.07	View	Add	DATA	Stock Item	Stock〇
Clamping pin	125741	QLA19DCP	54	42.5	17.8	1	0.23	View	Add	DATA	Stock Item	Stock〇
Clamping pin	125750	QLA26DCP	60	53	24	1.5	0.3	View	Add	DATA	Stock Item	Stock〇
Clamping pin	125759	QLA32DCP	72	65.5	30	2.4	0.63	View	Add	DATA	Stock Item	Stock〇
Clamping pin	162966	QLAH19DCP	72	44	17.8	5	0.55	View	Add	DATA	Stock Item	Stock〇
Clamping pin	162969	QLAH26DCP	79	53	24	7	0.71	View	Add	DATA	Stock Item	Stock〇
Clamping pin	162972	QLAH32DCP	92	59	30	10	1.07	View	Add	DATA	Stock Item	Stock〇

Usage

Clamp, and unclamp the exchanged jigs with small workpieces by valve operations.

Dimensions of mounting process

№	A h7	B	C	D	E +0.30	F	G
QLA19D	33	34	32.5	10	19	44	M4
QLA26D	37	38	36.5	10	23	48	M5
QLA32D	46	47	45.5	10	29.5	58	M6

※Need to machine tapped, port holes to follow the directions of dia. By checking the relations between top position of dia. and tapped holes.。

※1.There are 2 air-blowing ports and take use of one.
※2.Lift-up port must within area.
※3.O-ring contacted surface must be without burrs(roughness 6.33 or under).

Specifi cations

Drive system	Clamping	Pneumatic
	Un-clamp
№		QLA19D	QLA26D	QLA32D
Clamping force (kN) at 0.5MPa		1	1.5	2.4
Lift up force(kN) at 0.5MPa		0.28	0.36	0.62
Clamping stroke(mm)		4	4.5	5
Lift-up amount (mm)		1
Cylinder volume(cm3)	Clamping side	2.6	3.65	6.2
	Un-clamp side	2.7	3.85	6.76
Max. working pressure(MPa)		1
Min. working pressure(MPa)		0.4
Proof pressure(MPa)		1.5
Recommended air blowing pressure(MPa)		0.5
Fluid		Dry air
Ambient temperature (℃)		0～65
Weight(kg)		0.23	0.3	0.63

Structural drawing

Browsing history

Is there information you required?

Thank you.